Heat Treating
Email This Page
Print This Page
At one time Pillar was only known for the quality and innovation of the power supplies we provided for an entire industry. But that was only until we started engineering complete systems. Today, many years later, our reputation as a world-class supplier of induction heat-treating systems is just as well known and rock solid as it was in the beginning.
| So, if you’re looking at equipment for: | We can supply the: |
| Hardening | Power Supply |
| Tempering | Coil |
| Annealing | Scanner |
| Stress Relieving | Lift and Rotate System |
| Normalizing | Custom Part Handling |
| Complete Automation | |
| Factory Installation |
That you require.
Whether you need to run one part for a lifetime, or run a lifetime of different parts, Pillar’s Vertical Scanners are the choice to make. These versatile machines are designed to induction heat-treat your parts ... 
Single-shot Heat Treating refers to a process during which the part being heat-treated remains stationary in the induction coil during heating and quenching. The design and requirements of the component dictates that this process is ... 
For as long as Pillar has supplied heating systems, we have been supplying horizontal scanners. These installations have processed bars, tubes, and pipes, and they all have three sections: infeed, heating/quenching, and outfeed.
The drive mechanism, ... 
Gear Hardening requirements are very dependent on the application in which the gear will be used, and we often develop the process in our R & D Center outside Detroit. Through this lab testing you ... 
Cylinder liners are hardened utilizing a scanning process with a specially designed coil and quench block designed to fit the ID of the liner. The Pillar scanning process makes the end results predictable and repeatable.... 
Small engine crankshafts are statically hardened and special split coils are developed in our Detroit R&D and Commercial Heat Treat Facility to satisfy whatever hardening pattern is required. Because we are so centrally located in the center of ... 
Many types of fasteners require selective heat-treating for the applications they will be used in. Due to the liability of these applications, complete quality control is necessary for each fastener, which requires sophisticated monitoring and accept/reject capabilities. Pillar ...